Leather tool

There are 3 kinds of handle: Bocote, ebony, and rosewood.Harden steel DC53, very good quality and sharp, aosolutely handmade by us.The blade is 36mm, and handle is about 105mm, total lenght is about 160mm...

1. A new designed wood cutter, help you to cut belt when you want to make belt. the lenght is about 20CM, and width is about 4CM.2. The material is red beech, red beech is a kind of wood that very hard and not very easy to be deformed, it has best performance in all kinds of woods to make clamp,..

This is a round piece cutterBrand: OLFAModel: CPM-1Cut diameter:10mm-150mmBlade: one in knife and 4 giftedAdvice you to buy 15 pieces blades together..

Easy-to-Use Super Skiver for Thinning Leather Folds Seams Includes 3 BladesEasy way to skive (reduce thickness) of leather for areas that will be bent, folded or overlappedSpecial design helps prevent cutting too deeply into leather. Use right- or left-handedHeavy-duty cast aluminum hand..

There are 3 leathercraft modeling tool as one kit, they includes all modeling that we need, polished by hand absolutely, for cost control, we didn't use wood handle, but it works well.We don't sell them seperately...

For reducing the cost and letting more new players use our tools, we developed thie simplified version edge beveler.The handle is beech, not rosewood.The hoop is iron, not copper.But the steel is the same as the rosewood handle version, for pretty looking, we used garment washi..

We developed this edge beveler, and make perfect effect now :)Rosewood handle, HSS steel, exactly angle, skive leather as cut toufu. 6MM width.Please look at the video:https://www.youtube.com/watch?v=9C0dhAvbEy4..

This is a small aluminium alloy alcohol lamp, the height is 4.5cm and diameter is 2.8mm, very cute, but its flame is large and exuberant, I compared lots of products and finally choose this one, it is small, only 10ml, but can burn long time, what's more because it is metal, so very safe.I devel..

Here are the dies of the installer/press machine in our store.Double operation machine:http://www.leathercraftpattern.com/double-operation-installer-machineHand operation machine:http://www.leathercraftpattern.com/leather-tools-leathercraft-tools/installer-tool/hand-operation-installer-machi..

This is a hand operation installer machine for install snaps, eyelets, nails and so on. The height is 46cm, and handle is 33.5cm, the base is 23cm, the base hole diameter is 2cm. It is compatible to the installers in our store...

Here are the eyelet installer moulds for installer machine, you can buy the machine from here:Double operation machine:http://www.leathercraftpattern.com/installer-machine/double-operation-installer-machineHand installer machine:http://www.leathercraftpattern.com/leather-tools-leathercraft-t..

This is a double control snap installer machine, it can be used to install different snaps, eyelets, nails, conchos and so on by changing different install moulds, you can buy different moulds here: ..