My TOP wisdom! It cost my hundards of hours and 10000 kilo heart blood to create this mold!! Holding the serious attitude, I tried looooots of times and finally find a perfect angle. So this work is perfect! When you see it, I am sure there will be a big WOW on your face!
It is for those respectful leather workers! I wish you love it! Because only you know and admit its value!
The material is POM, very good quality, very strong, no need to worry about the attrition at all.
There are 2 parts as one kit.
To look at the picture to know how large it is. There are two sizes, large and small, choose what you need.They are the same price. The finished large skull face is 138.9mm x 194.3mm, and the small skull face is 148.6mm x 106.7mm.
How to make it?
Step 1: Wet your vegetable tanned leather absolutly in a pool or basin that with water.
Step 2: Put the wetted leather in the mold and fasten them with a jack tool, you must use jack tool pressing machine for this mold, G clamp and vise are not OK!
Step 3: Loosen the pressing machine and take out the molded leather.
Step 4: Cut off the redundant leather and paint the color you want, sew them together
1. It needs to wait 30 days to make this mold, the reason why such long time is because the material is very large, if we only make one, that will be very high cost, so we need 30 days to gather orders, please do be patient, 30 days it will be sent out to you.
2. We use DHL to send the mold.
3. There will be some small floss on the mold, if you know mechanical process tech, you will understand it can't be avoided, use a piece of sand paper to clean it easily.
4. We will test it before sending, so if you think it was used or second hand, you are wrong. ^^