Installer tool

You can improve efficiency a lot. V2 can adjust distance, so only need one jig for No.3 No.5 M4 M6 zipper slider.Look at the V1 video: https://youtu.be/XFQbpmy6bGU..

Here is a new designed snap remover, it was designed to remove THK snap, but we tried other snap and it works well too.Anyhow, THK snap is really very good quality and has very good cost performance.Simply put installed snap in hole and use handle to punch it off. It can remove both male and female ..

LCP and Yorkshine joint signed brand. High quality handmade leather tools.Well designed construction offer you quite smooth experience,The installer tool is for THK snaps. You can have them here:https://www.leathercraftpattern.com/THK-10mm-snapshttps://www.leathercraftpattern.com/THK-brass-spri..

This is a good tool to make zipper on corner beautiful. There are 3 different diameters for different bags.Look at the video to know how it works: https://youtube.com/shorts/ewBa2roimZs..

Harden plastic scraper, used to insert edge of leather into the gap, look at the video to know more...

SPC high quality snap install tool, wolfram steel as material, 12 pieces a kit, almost suitable for all snaps in the world...

It is very hard to wrap leather on snap, this tool will make it easily.There are 4 holes 10mm, 13mm, 15mm, 17mm designed for different snaps.Normally the leather should be under 0.5mm.Step 1: Cut off round leather by this tool.Step 2: Paint glue on flesh side and put snap into gear hole, adjust by a..

Professional leather pincers.3Cr13 as material, HRC50+, the most strong pincers in the market.Use ball bearing in occlusal area, very smooth.The pattern of the leather handle will be gifted.There are 2 width, 30mm and 40mm, choose what you need...

You can improve efficiency a lot.Look at the video: https://youtu.be/XFQbpmy6bGU..

It is mushroom rivet instal tool kit (the recesses is a half round shape), it includes:1) 6mm mushroom rivet install tool;2) 7mm mushroom rivet install tool;3) 8mm mushroom rivet install tool;4) 9mm mushroom rivet install tool;5) 10mm mushroom rivet install tool;6) 12mm ..

It is snap install tool kit, it includes:1) 7mm rivet install tool (Can install 6mm or below rivets);2) 8mm rivet install tool;3) 9mm rivet install tool;4) 10mm rivet install tool;5) 12mm rivet install tool;6) Mutifunctional Base + two seperate bases.We don'..

Very good quality rivet setters, better than C. S. Osborne too much. This is the best rivet install tool in the world.The concave recess were hand polish very carefully very smooth, so when you shoot the rivet, the finished effect is very good.The net weight is 205gIf you need the r..

a) Quantity: 1 piece + 1pcs Glue b) Size: Length about 135mm, handle about 80mm. c) Parameters:  Constant temperature 356℉ - 392℉ (180 - 200℃)  Voltage: AC100 - 240V, could be used in any country d) Materials: Steel, plasticI think it is very useful for any Diyer, also very useful..

Here are two kinds of pliers that to install leather hardwares such as hanger, metal frame and so on. When you get it, please paste two pieces of leather on the mouth, and you can wear a leather coat for its handle :)..

Here are the dies of the installer/press machine in our store.Double operation machine:http://www.leathercraftpattern.com/double-operation-installer-machineHand operation machine:http://www.leathercraftpattern.com/leather-tools-leathercraft-tools/installer-tool/hand-operation-installer-machi..

This is a hand operation installer machine for install snaps, eyelets, nails and so on. The height is 46cm, and handle is 33.5cm, the base is 23cm, the base hole diameter is 2cm. It is compatible to the installers in our store...

Here are the eyelet installer moulds for installer machine, you can buy the machine from here:Double operation machine:http://www.leathercraftpattern.com/installer-machine/double-operation-installer-machineHand installer machine:http://www.leathercraftpattern.com/leather-tools-leathercraft-t..

This is a double control snap installer machine, it can be used to install different snaps, eyelets, nails, conchos and so on by changing different install moulds, you can buy different moulds here: ..

It is snap instal tool kit, it includes:1) 633 snap install tool;2) 655 snap install tool;3) 831 snap install tool;4) 201 snap install tool;5) a piece of 2mm punch;6) Base.We don't want to sell them seperately, because the whole piece is only 16.99$ fre..

There are lots of sizes, please choose what you need. More details please look at the chart below. Specification For internal Φ of eyelet For external Φ of eyelet Weight 100# 3.5mm 7mm 50-60g 150# 4mm 7.5mm 50-60g ..