Leathercraft tool

3M 362L sandpaper is ceiling level in abrasive area.Not like normal sand paper, the sand is Alumina, and back film is Polyurethane. Used on both dry and wet situation. When you use it for leather edge processing, the sand won't fall and pollute the leather edge.Light blue: 9 mic=..

Use this tool to adjust different sizes of strap tip. 20mm-40mm.For example, if you make a waist belt that wide 23.5mm, this tool is useful...

PA6 nylon, for puncher and chisel, 3 sizes...

Wood handle bristles brushes, good quality. 10pcs/lot..

This kind of bowl is used popular in factory and studio, it can seal well, so the glue in will keep longer time.There are different color, choose what you need...

Made by walnut, put edge rubber in small bottle and swabs in large bottle, what's more you can put the trouble cell phone on it when you do leather work. ..

Walnut wood as handle, 8mm thick tempering glass, whole size 120mm x 90mm...

wood handle leathercraft swivel knife, adjustable height.Rosewood as handle...

Stainless steel thimble, there are 2 types.One type is a finished thimble, choose the one to wear it directly.The other one is a half finished thimble, you can sew it on a piece of leather ring to design a thimble yourslef.Both of them has mirror polished and stone washed color...

This spray gun is designed for water base white glue, such as 1816B, the jar can contain 400ml white glue in, very suitable for small or middle leather studio.It can only work with white glue, can't work for yellow glue, pink glue or oil paint.You should have 0.8Mpa air pump to use it. If you o..

This is an intelligent tool to hammer the thread flat in narrow place after sewing...

LCP and Yorkshine joint signed brand. High quality handmade leather tools.Used to sharp the Yorkshine edge beveler, edger. Well designed construction offer you quite smooth experience,Well optimized detailed,Carefully chosen material, aluminum alloy, anodic oxidated plate.Reasonalbe price...

LCP and Yorkshine joint signed brand. High quality handmade leather tools.Well designed construction offer you quite smooth experience,Hand polish mirror effect,Well optimized detailed,Carefully chosen material, DC53 steel, 56HRC,Reasonalbe price...

CNC processing stainless steel spout, especially for ECOSTICK 1816B White glue, the glue will come out very evenly. No need to paint glue by a piece of stick bar and the glue will be painted unevenly...

It can be used for strap hole orientation, or draw parallel lines on leather when you use leathercraft basket stamp. Also can use on BV bag making by company with "[" style puncher:https://www.leathercraftpattern.com/leather-tool-leather-craft-tool-leather-punch-leather-chiselThere are 3 sizes:..

It was designed for trim the binder neat easily, look at the video.https://youtu.be/-fGZoCMmBugWe design a handle, then when you need sharp the blade, just need install the blade on the handle, that will make your sharp work easily...

Wulnut wood blade polisher box. Suitable for 1mm (2.5oz) vegatable tanned leather.You can paint different # jewelers rouge on 2 sides. This design won't dirty your leather and you can close the box after use.External size: 15cm x 7.5cm x 3cm.Internal size: 13cm x 5.5cm x 0.1cm.The parcel will be sen..

Solid brass edger used to enlarge the edge of exact pattern to get material piece. Very useful.There are 2 kinds, small hole for awl, and large hole for ballpen.6mm/8mm/10mm/12mm/14mm/20mm for each kit...

Very good quality, popular size is No.2.No.1: 18mm x 40mmNo.2: 22mm x 45mmNo.3: 25mm x 52mmThe price is for 12 pieces...

Wood handle raw cowhide mallet.Rawhide mallet has better customer experience than nylon mallet. For nylon one, the more you use, the face of nylon will be broken, until it can't work anymore. But for rawhide mallet, the more you use, the face of mallet will be more fluffy, and you will feel more com..

Glue container with 10 sponge brushes. 1L...

3Cr13 stainless steel as material, Hand polish as mirror.Use it both on yellow glue and white glue, clean it as soon as possible after use.3 pieces/lot.Size:Large: 9.7cm x 5.4cm, about 2.3mm thick. Middle: 13cm x 4cm, about 2.3mm thick.Small: 11.7cm x 2cm, about 2.3mm thick...

It is her, the famous red hammer in leather circle. Made by PE, weight 334g...

Horsehair brush. Size: 15cm x 5cm x 4cm, for leather caring...

John James hand sewing needles, round tip, 25 pieces each pack.No.1: 5.45cm long and diameter 1.0mmNo.2: 5.4cm long and diameter 1.05mmNo.3: 5.35cm long and diameter 1.02mmNo.4: 4.8cm long and diameter 0.9mm..

High quality Prong Lacing Needle from Craft..

New design, solid brass thread hammer, jewel level mirror polished.The wood handle is made by rosewood, and mirrow polished either.The total lenght is about 270mm, the diameter of the face is about 30mm, The height of the head is about 60mm...

I use M390 steel to develop some swivel knife blades. This kind of steel comes from Austra BÖHLER M390 MICROCLEANIt was used to made long bearing model and surgical knife, it has wonderful keeping character.This blade can bear very long use, you no need to sharp it frequen..

There are 3 leathercraft modeling tool as one kit, they includes all modeling that we need, polished by hand absolutely, for cost control, we didn't use wood handle, but it works well.We don't sell them seperately...

Helps keep your swivel knife blade at the proper angle while honing. Hone not included...

The round head mauls was developed by us, it is 20cm long, the round head diameter is 50mm, the weight is about 360g...

Regularly stropping your swivel knife blades and cutting knives will ensure you maintain the sharpest edge for the best performance of your investment. The strop is easy-to-use and helps align the micro-edge of any blade. One side is the grain side (smooth) and the other side is th..

Make a straight cut along the edge of tooling leather using a swivel knife attached to this handy guide.Fast and easy way to carve perfect borders Adjusts from 1/16" (0,2 cm) to 1 1/2" (1.3 cm) . Cutter not included.Stainless steel material with perfect electroplating, never fade a..

The ceramic swival knife blade, there are 4 sizes:7mm oblique blade7mm single blade10mm single blade10mm double bladePlease choose what you need, the diameter of the pole is 5.2mm, you can see it can fit almost all kinds of swival knife.The ceramic swival knife blade is ..